 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
|
|
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
NEW Automotive / Engine Treatment -
Roil Gold
Revolutionary high performance automotive and cars
engine treatment, an oil additive, that reduces friction...
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
Test Results
There are a number of tests available to verify the characteristics of lubricating fluids.
They are carried out in accordance with specific industry standards that are recognized
worldwide.
Neways commissioned the Queensland University of Technology (QUT) in Australia to conduct
the following tests, which conducted many times previously, in accordance with the
American Society for Testing and Materials (ASTM) standards.
As the QUT carries out these tests for companies all over Australia, they cannot, for
obvious reasons, personally endorse any particular product they test. They do, however,
provide concise independent testing so consumers can form opinions on an informed basis.
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Test One: ASTM D3233B
Standard test method for extreme pressure properties of
fluid lubricants (Falex pin and vee block method).
A Falex test machine was used to conduct these tests. The test consisted of running a
rotating steel journal at 290 ± 10 rpm against two stationary V blocks immersed in the
lubricant sample. Load is applied to the V blocks by a ratchet mechanism.
During the test, the load is increased in 250 lbf increments with load maintained constant
for one (1) minute at each load increment. The load fail value is obtained at the point
the test fails. |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
480 ml £24.68
US $34.95
ORDER |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
Neways provided the university with five samples for testing:
Sample A: A popular brand of mineral based oil.
Sample B: A popular brand of synthetic oil.
Sample C: A popular brand of additive mixed with mineral oil (sample A).
Sample D: Another popular brand of additive mixed with mineral oil
(sample B).
Sample E: Roil Lower Engine Treatment mixed with mineral oil,
(sample A).
As you can see from the test results (pictured), Roil proved itself to be an outstanding
product capable of handling extreme pressure and reducing friction.
The graph shows Sample E (containing the Roil
Treatment) did not fail at 4,500 lbs of true load. This was the maximum limit of the
testing apparatus.
Test Two: ASTM D2783
Standard test method for
measurement of extreme pressure properties of lubricating fluids (Four ball method).
A Four Ball EP test machine is used for this test. It is operated with one steel ball
under load rotating against three stationary steel balls submerged in the test lubricant.
The rotating ball moves at 1760 ± 40 rpm. The machine and test lubricant are heated to
35° C, and then a series of tests, each of 10 seconds duration, are carried out under
increasing amounts of load until welding of the balls occurs. The load at which the balls
weld is recorded, as is the load wear index. This is determined by the size of the 'scars'
on the balls, which are measured under a microscope-- the higher the index, the better the
result.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
480 ml £24.68
US $34.95
ORDER |
|
|
|
|
|
|
|
 |
|
|
|
|
|