|
NEW Automotive / Engine Treatment -
Roil Gold
Revolutionary high performance automotive and cars
engine treatment, an oil additive, that reduces friction...
FAQ…
What is the formula for the Roil products?
Roil formula details are proprietary and are not
available for distribution.
Do the Roil Treatment products have a shelf life?
Roil stays stable and viable for years.
Can Roil cause a drop in oil pressure?
In some older cars the oil pressure may drop briefly while the Roil begins working, but
within a short time it should increase to normal.
How does Roil affect cylinders that have been re-
bored?
Roil does not form any physical teflon fused type bond
as PTFE products. It is composed of all pure petroleum oils and detergent products to
penetrate and treat the pores of all metal it comes into contact with. A new chemical
compound with a lower coefficient of friction is formed. Engines treated with Roil can be
re- bored when needed.
What are the freezing and boiling points of Roil?
The freezing point is 20° F/- 7° C; the boiling point
is 348° F/ 175° C.
Does Roil contain silicone?
No.
Can Roil products pass through a 3 micron filter?
Yes.
Can Roil be used in brake fluid?
No.
How do you apply the Roil products in marine motors
considering that a small amount of salt water gets into the motor? How does Roil interact
with salt water?
Roil does not mix with salt water and does not protect
or prevent salt water damage from occurring. Roil products can be used in all types of
marine engines.
Will using Roil void car warranties?
Roil does not void warranties in the US. If in doubt,
please check with the manufacturer.
Will the Roil Treatments wash off with water- based
fluids or emulsified oils?
Roil treatments chemically bond with the metal being
treated, therefore they are not washed off by water- based fluids or emulsified oils.
Could Roil be used to reduce friction on down-hole tools lubricated with water- based
muds? We would not recommend Roil for this application. However, the metal tools
could be soaked in Roil to enhance their hardness and reduce friction.
Can wheel bearings be soaked in Roil before being
packed in grease?
This is an excellent idea-- soak the bearings in Roil
first.
Does Roil work equally well on white metal, copper, and
lead as well as on standard roller and ball bearings?
The treatment is specifically designed for steel and
iron, and works less effectively on copper or lead.
Are Roil products affected by temperature?
Roil products are temperature stable, both hot and
cold.
Are Roil products suitable for the aviation industry?
The aviation industry has rigid specifications and
potential users should investigate on their own and seek manufacturer approval.
Most cars in the US are designed to run on unleaded
fuel, but some older cars on the road were designed prior to the introduction of unleaded
fuel. Can Roil help reduce friction in such cars?
Yes. The use of Roil will reduce friction. The
reduction of friction and lubrication is the major reason for the incorporation of lead
into fuel. Some vehicles require less lubrication. As a result, the Australian government
has released a booklet advising some car owners to use unleaded fuel instead of leaded.
However, some vehicles require greater amounts of lubrication, and the Roil treatment
would be very beneficial in these vehicles. The Roil Fuel Treatment would also help
condition the piston and the sleeves, thereby lessening the need for lubrication derived
from leaded fuels.
Do the Roil treatments have anything to do with
fluorohydrocarbons that may damage the ozone layer?
No.
High Performance Formula -- Engine Treatment
High Performance Formula -- Automatic Transmission
High Performance Formula -- Manual Transmission and
Differential
| Home Page | FAQ's - Facts | Email
Us |
Contact Details |
If you use oil you need
Roil…………………………….
Cars, truck, motor bike, tractor engine oil additive
Copyright © 2000 A Newlife All Rights Reserved
Independent Distributors of the finest products in the world.
|
|
